How it works

The sheets are fed into the trimming press by a wheel-driven system positioned at the machine infeed.

The sheets are kept perfectly aligned by precision guides that control their path through the press.

Following the guided path, each sheet is first lifted and then progressively conveyed towards the trimming area.
A photocell detects the position of the container and controls its advance until it is accurately centered within the trimming die.

The moving platen closes and, through the combined action of punches and dies, performs precise trimming of each individual container.

The trimmed trays are ejected from the die by the GEP device and transferred to the stacking unit, where they are neatly stacked until the preset quantity is reached.

Once the programmed number of pieces has been reached, an additional stroke of the GEP system creates a separation between the completed stack and the next one, facilitating collection and packaging operations.

Technical specification

Dimensions (width × length × height), mm2590 × 5380 × 3200
Weight (approx.), kg14000
Power consumption, kW18
Maximum speed, rpm100
Maximum sheet width, mm1400
Maximum cutting depth, mm180
Maximum mould dimensions, mm1670 × 702
Clearance between closed platens, mm395
Moving platen stroke, mm240
Platen closing adjustment, mm±10
Maximum platen closing force, daN0.583
Static load on supports, kg/cm²6.9

Video gallery

Fotogallery

Related products